General Industry Thermocouples



5500 Series Pencil Thermocouple

5500 Series Pencil Thermocouple

Ideal for Applications Under 900°F (480°C) Small Diameter Thermocouple with Fiberglass Insulation Used Extensively for Food Application Commonly Installed with Compression Fittings Used in a Variety of Industries

5504 Series Replacement Elements

5504 Series Replacement Elements

Bare wire element May be used as a Replacement Thermocouple Element in Existing Thermowells and Protection Tubes The Units are Available in All Calibrations and Meet Standard or Special Limits of Error (Special Limits of Error Must Be Specified) Platinum […]

5513 Series Contact Thermocouple

5513 Series Contact Thermocouple

Recommended for Plastic Molding and Bearing Temperature Measurements up to 900°F (480°C) An Ideal Assembly Where Constant Contact of the Hot Junction is Required to Indicate Rapid Temperature Changes Spring Loaded Bayonet Cap

5514 Series Needle Point Thermocouple

5514 Series Needle Point Thermocouple

Designed for Piercing Food Products Supplied with an Insulated Element Encased in 316 or 304 Stainless Steel Sheath Recommended for a Temperature Range of -40°F (-40°C) to +500°F (+260°C) Supplied with W2 Grounded Junction

5527 Series Magne-Couple

5527 Series Magne-Couple

Magnet holding force is 16 lbs. Rugged Assembly for most applications Measures temperature from any ferrous surface Capable of use to 1000°F (535°C) without degradation The powerful Alnico Magnet forces the springloaded sensing tip into contact with the sensor surface […]

5504a Series Replacement Elements

5504a Series Replacement Elements

Bare wire element with Ceramic Insulators May be used as a Replacement Thermocouple Element in Existing Thermowells and Protection Tubes The Units are Available in All Calibrations and Meet Standard or Special Limits of Error (Special Limits of Error Must […]

5508 Series Immersion Thermocouple

5508 Series Immersion Thermocouple

Recommended for Temperatures Up to 900°F (480°C) Except with Junction Style W-5 Which is Rated for 300°F (150°C) Available in .187″ and .250″ Diameters Fiberglass or Teflon Insulation with Optional SS Overbraid

5504b Series Replacement Elements

5504b Series Replacement Elements

May be used as a Replacement Thermocouple Element in Existing Thermowells and Protection Tubes The Units are Available in All Calibrations and Meet Standard or Special Limits of Error (Special Limits of Error Must Be Specified)

5508A Series Immersion Thermocouple

5508A Series Immersion Thermocouple

Recommended for Temperatures Up to 900°F (480°C) with Junction Style W-5 Which is Rated for 300°F (150°C) A Stainless Steel Flexible Armor Encases the Extension Lead to Prevent Mechanical Abrasion