Components



108/109 Series High Temperature Connector

108/109 Series High Temperature Connector

A specialized thermocouple connector for high temperature applications up to 1000°F (538°C) All fastenings are stainless steel and are non-magnetic and non-rusting A specialized thermocouple connector for high temperature applications up to 1000°F (538°C). This positive contact polarized connector is […]

Water Proof Connector

Water Proof Connector

Accommodates Thermocouple Sheath Diameters from .062″ to .250″ Connector Bodies are Type 303/304 Stainless Steel Polarized Connector Contains Matched Thermocouple Alloy Contacts to Insure Accuracy Assembly is Rated 225°F (107°C) Service Unit is Pre-Wired at Factory with Extension Grade PVC […]

Waterproof Quick Disconnect Connector

Waterproof Quick Disconnect Connector

Accommodates any Two Combination of Sheath Diameter from .062″ to .250″ Connector Bodies are Type 303/304 Stainless Steel Polarized Connector Contains Matched Thermocouple Alloy Contacts to Insure Accuracy Assembly is Rated 225°F (107°C) Service A waterproof quick-disconnect connector, designed for […]

110/111 Series High-temperature Connector to +350°F (+177°C)

110/111 Series High-temperature Connector to +350°F (+177°C)

A standard industrial ANSI color coded thermocouple connector for use up to +350°F (+177°C) The housing is made of glass filled nylon instead of ceramic and has much improved impact resistance A standard industrial ANSI color coded thermocouple connector for […]

130/131 Series Miniature Connector

130/131 Series Miniature Connector

This miniature connector is ideal for use where space is at a premium The body is glass filled nylon with an overall temperature rating of 350°F (177°C) continuous A miniature connector is ideal for use where space is a premium. […]

150/151 Series 3-Pin Connector

150/151 Series 3-Pin Connector

A three pin version of the 110 and 111 series connector for use on thermocouple or RTD assemblies This connector has 3 rolled copper pins with polarity markings, a glass filled nylon shell rated to 350°F (177°C) continuous 3-Pin version […]

1013 Series Jack Panel

1013 Series Jack Panel

A five point jack that can be readily installed into a standard FS or FD conduit box Contact materials are thermocouple alloys embedded in molded phenolic Each circuit is identified by numbers 1-5. Jack panel accepts series 109 and 111 […]

1014 Series Multi-Strip Panel

1014 Series Multi-Strip Panel

Panels available in 2, 4, 6, 8, 10, and 12 circuits, also in combinations of thermocouple alloys in one strip Combinations must be multiples of two and must total the number of circuits in each strip. The overall temperature rating […]

Cable Clamps 1209 Series

Cable Clamps 1209 Series

Recommended for use with series 108, 109, 110, 111, 150 and 151 connectors. This clamp will accommodate extension leads up to 3/8″ diameter

Cable Clamps 1239 Series

Cable Clamps 1239 Series

Recommended for use with series 130 and 131 connectors. This clamp will accommodate extension leads up to 3/8″ diameter

Tube Adapters 1210 Series

Tube Adapters 1210 Series

For use with 108, 109, 110, 111, 150 and 151 connectors to rigidly mount a quick disconnect to your sheathed thermocouple.

Tube Adapters 1240 Series

Tube Adapters 1240 Series

For use with 130 and 131 connectors to rigidly mount a quick disconnect to your sheathed thermocouple.

Weatherproof Boot  1471 Series

Weatherproof Boot 1471 Series

A flexible neoprene rubber boot especially designed for moisture proofing wire connections on the 1015 or the 1016 series head. The boot fits tightly around the base of the head, and 1/8″ to 3/16″ tapered hole seals a variety of […]

Thermoseal

Thermoseal

Polymerized Low-Viscosity Silicone Prevents Moisture penetration up to 1000°F (538°C) 2 oz. bottles standard, 8 oz. available. ”Thermoseal” is a polymerized low-viscosity silicone fluid with proven ability to form a positive moisture barrier for mineral insulated thermo-couple and heater elements. […]

Leadwire Adapter

Leadwire Adapter

Open end thermocouples should be sealed with a moisture sealant such as “Thermoseal” after conductors have been exposed prior to attaching leadwire. A small, easily assembled transition fitting for adapting sheathed, mineral oxide insulated thermocouples to leadwires. the leadwire adapter […]

BF Series Brass Mounting Adapter

BF Series Brass Mounting Adapter

A brass compression type fitting containing a ferrule to accommodate your desired probe diameter. An economical and practical fitting used in areas where pressure and temperature are relatively low. Other tube and thread combinations available. Consult factory.

SF316 Series Stainless Steel Mounting Adapter

SF316 Series Stainless Steel Mounting Adapter

A leakproof double ferrule type compression fitting machined from 316 stainless steel. The ferrules are deformed during assembly and cannot be relocated on the thermocouple assembly. It is ideal where the probe must be removed and replaced at the same […]

ST304 Series Stainless Steel Mounting Adapter with Sealant

ST304 Series Stainless Steel Mounting Adapter with Sealant

Soft sealant-type machined from stainless steel Sealants are available in lava, neoprene and teflon Replacement sealants are also available A soft sealant-type fitting machined from stainless steel. Thermocouple may be relocated to various immersion depths by loosening threaded cap and […]

SF304 Series Stainless Steel Mounting Adapter

SF304 Series Stainless Steel Mounting Adapter

Metal ferrule-type machined from stainless steel Ferrule and thermocouple sheath are deformed during installation A metal ferrule-type fitting machined from stainless steel. Ferrule and thermocouple sheath are deformed during installation; therefore thermocouple cannot be repositioned after metal deformation. Mounting adapter […]

1417 Series Replacement Sealants

1417 Series Replacement Sealants

Listed are replacement sealants for our ST304 Series Mounting Adapters. When ordering, specify part number for the sealant required and add sealant material suffix letter to the end of the part number.

1020 Series Miniature Screw Cover Head

1020 Series Miniature Screw Cover Head

A light weight (only 3 oz.), all-aluminum head for single or duplex thermocouple elements. Readily adapted to small diameter protection wells or mineral oxide insulated sheathed thermocouples up to .250 diameter by use of a 1/8″ NPT compression fitting. Also […]

Cap–1053

Cap–1053

Mates with the 1513 adapter with simple push and twist-action, retained by spring tension.

Retaining Ring–M-1379-3

Retaining Ring–M-1379-3

Shoulder designed to transmit spring pressure to the thermocouples. Must be silver soldered to sheath.

Spring–1082

Spring–1082

Spring will always compress to approximately one half its relaxed length, hence it may be cut to desired size.

Adapter–1513

Adapter–1513

Slotted design allows fast screwdriver installation in 1/8″ NPT tapped hole.

Ceramic Terminal Head

Ceramic Terminal Head

1015 Series For Single or Duplex Thermocouple Applications A high-temperature binding screw type terminal similar to the 1016 Series, but capable of withstanding temperatures up to 1000°F. The four separate binding screws permit usage in duplex applications. Single thermocouples may […]

Fiberglass Terminal Head

Fiberglass Terminal Head

1016 Series For Single Thermocouple Applications This economical binding screw-type terminal is readily installed on Thermo-pak materials with standard silver solder. Four binding screws are provided, two for connection of thermocouple conductors and two for lead connections. This terminal has […]

Replacement Block 1018A

Replacement Block 1018A

1018A Single Terminal Block (2 Terminals)

MINIPAQ-HLP Programmable Temperature Transmitters

MINIPAQ-HLP Programmable Temperature Transmitters

MINIPAQ-HLP is a basic, programmable non-isolated, easy-to-use 2-wire transmitter. The Low Profile housing has a height of only 18.5 mm / 0.72 inch. Configuration is made in seconds with the user friendly Windows software, MINIPAQ Soft. No external power supply […]

Replacement Block 1018B

Replacement Block 1018B

1018B Duplex Terminal Block (4 Terminals)

Replacement Block 1018C

Replacement Block 1018C

1018C Triplex Terminal Block (6 Terminals)

MESO-H & MESO-HX Programmable Temperature Transmitters

MESO-H & MESO-HX Programmable Temperature Transmitters

MESO-H/-HX are smart and universal 2-wire in-head transmitters for temperature and other measurement applications. MESO-H/-HX are fully HART-compatible, with communication through the HART protocol. Features Utilizes HART Protocol for remote configuration and monitoring Communicates with HART Communicator or PC via […]

2018 Series Cast Explosion Proof Screw Head

2018 Series Cast Explosion Proof Screw Head

Available in cast iron and aluminum Cover contains internal threads and gasket to assure water-tight connection Ceramic terminal blocks for high temperature application Negative lead identification by color code is indicated inside cover A stainless steel chain is furnished with […]

1028 Series Poly Head

1028 Series Poly Head

A polypropylene, gasket, screw cover head which is extremely resistant to most corrosive and capable of withstanding 220°F (105°C) continuous operations. This U-V stabilized plastic terminal head is both practical and economical. Available with either single or duplex terminal blocks […]