5500 Series Pencil Thermocouple

5500 Series Pencil Thermocouple

Ideal for Applications Under 900°F (480°C) Small Diameter Thermocouple with Fiberglass Insulation Used Extensively for Food Application Commonly Installed with Compression Fittings Used in a Variety of Industries

5504 Series Replacement Elements

5504 Series Replacement Elements

Bare wire element May be used as a Replacement Thermocouple Element in Existing Thermowells and Protection Tubes The Units are Available in All Calibrations and Meet Standard or Special Limits of Error (Special Limits of Error Must Be Specified) Platinum […]

5513 Series Contact Thermocouple

5513 Series Contact Thermocouple

Recommended for Plastic Molding and Bearing Temperature Measurements up to 900°F (480°C) An Ideal Assembly Where Constant Contact of the Hot Junction is Required to Indicate Rapid Temperature Changes Spring Loaded Bayonet Cap

5514 Series Needle Point Thermocouple

5514 Series Needle Point Thermocouple

Designed for Piercing Food Products Supplied with an Insulated Element Encased in 316 or 304 Stainless Steel Sheath Recommended for a Temperature Range of -40°F (-40°C) to +500°F (+260°C) Supplied with W2 Grounded Junction

5527 Series Magne-Couple

5527 Series Magne-Couple

Magnet holding force is 16 lbs. Rugged Assembly for most applications Measures temperature from any ferrous surface Capable of use to 1000°F (535°C) without degradation The powerful Alnico Magnet forces the springloaded sensing tip into contact with the sensor surface […]

5504a Series Replacement Elements

5504a Series Replacement Elements

Bare wire element with Ceramic Insulators May be used as a Replacement Thermocouple Element in Existing Thermowells and Protection Tubes The Units are Available in All Calibrations and Meet Standard or Special Limits of Error (Special Limits of Error Must […]

5504b Series Replacement Elements

5504b Series Replacement Elements

May be used as a Replacement Thermocouple Element in Existing Thermowells and Protection Tubes The Units are Available in All Calibrations and Meet Standard or Special Limits of Error (Special Limits of Error Must Be Specified)

5508 Series Immersion Thermocouple

5508 Series Immersion Thermocouple

Recommended for Temperatures Up to 900°F (480°C) Except with Junction Style W-5 Which is Rated for 300°F (150°C) Available in .187″ and .250″ Diameters Fiberglass or Teflon Insulation with Optional SS Overbraid

5508A Series Immersion Thermocouple

5508A Series Immersion Thermocouple

Recommended for Temperatures Up to 900°F (480°C) with Junction Style W-5 Which is Rated for 300°F (150°C) A Stainless Steel Flexible Armor Encases the Extension Lead to Prevent Mechanical Abrasion

5520 Injection Molding Thermocouple

5520 Injection Molding Thermocouple

Compression Type Thermocouples for Injection Molding Applications 304 Stainless Steel Sheath 1/8″ NPT Brass Male Adapter is Supplied Standard. All Stainless Construction with Fiberglass Insulated Wire 800°F Maximum Operating Temperature

5521 Injection Molding Thermocouple

5521 Injection Molding Thermocouple

Compression Type Thermocouples for Injection Molding Applications 304 Stainless Steel Sheath 1/8″ NPT Brass Male Adapter is Supplied All Stainless Construction with Fiberglass Insulated Wire 800°F Maximum Operating Temperature

5522 Injection Molding Thermocouple

5522 Injection Molding Thermocouple

Compression Type Thermocouples for Injection Molding Applications 304 Stainless Steel Sheath 1/8″ NPT Brass Male Adapter is Supplied All Stainless Construction with Fiberglass Insulated Wire 800°F Maximum Operating Temperature

5523 Spring Loaded Injection Molding Thermocouple

5523 Spring Loaded Injection Molding Thermocouple

Spring Rated for 800ºF (425ºC) Maximum Service 304 Stainless Steel Sheath Spring Loaded to Maximize Heat Transfer All Stainless Construction with Fiberglass Insulated Wire 800ºF Maximum Operating Temperature

5524 Spring Loaded Injection Molding Thermocouple

5524 Spring Loaded Injection Molding Thermocouple

Spring Rated for 800°F (425°C) Maximum Service 304 Stainless Steel Sheath Spring Loaded to Maximize Heat Transfer All Stainless Construction With Fiberglass Insulated Wire 800°F (425°C) Maximum Operating Temperature

5525 Spring Loaded Injection Molding Thermocouple

5525 Spring Loaded Injection Molding Thermocouple

Spring Rated for 800°F (425°C) Maximum Service 304 Stainless Steel Sheath Spring Loaded to Maximize Heat Transfer All Stainless Construction With Fiberglass Insulated Wire 800°F (425°C) Maximum Operating Temperature

5528 Universal Thermocouple

5528 Universal Thermocouple

Adjustable Immersion Stainless Steel Flex-Hose Acts as a Spring Commonly Used for Injection Molding, Heated Dies, Platens, Pipelines and Others Stainless Steel Construction Rated for 800°F (425°C) Thermocouple Conductors are Insulated with Fiberglass Braid Inside and .281″ Diameter Stainless Steel […]

5529 Universal Thermocouple

5529 Universal Thermocouple

Adjustable Immersion Using 12 inch Long Spring Commonly Used for Injection Molding, Heated Dies, Platens, Pipelines and Others Stainless Steel Construction Rated for 800°F (425°C) Thermocouple Conductors are Insulated with Fiberglass Braid and Stainless Steel Overbraid Sheath Diameter .187″ Grounded […]

300 Series General Purpose Thermocouple

300 Series General Purpose Thermocouple

Mineral Insulation Enables Thermocouples to be used at Higher Temperatures Industry Standard Color-Coded Quick Disconnect Commonly Installed with Compression Fittings (Adapter) High Strength Bendable Designs

400 Series Transition Joint Thermocouple

400 Series Transition Joint Thermocouple

Mineral Insulation Enables Thermocouples to be used at Higher Temperatures Industry Standard Color-Coded Quick Disconnect Commonly Installed with Compression Fittings (Adapter)

700 Series Industrial Thermocouple

700 Series Industrial Thermocouple

Industrial Design with Cast Screw Cover Heads “Factory Mutual” Approved Heads in Cast Iron and Aluminum High strength Bendable Designs Mineral Insulation Enable Thermocouples to be used at Higher Temperatures

1400 Series Washer Thermocouple

1400 Series Washer Thermocouple

Designed for High Temperature Bolt or Stud Applications Stainless Steel Washer Welded Construction with Grounded Junction

800 Series Base Thermocouple Element

800 Series Base Thermocouple Element

Available in all Standard Sheath Diameters and Sheath Materials Mineral Insulation Enables Thermocouples to Be Used at Higher Temperatures Bare Leads Provided for Terminations of Your Choice

900 Series Miniature Head Thermocouple

900 Series Miniature Head Thermocouple

Supplied with a Lightweight Miniature Screw-Cover Head Waterproof Cover Available High Strength Bendable Design Mineral Insulation enables Thermocouples to be used at Higher Temperatures.

2100 Series Refinery Thermocouple Assembly

2100 Series Refinery Thermocouple Assembly

Complete Thermocouple Assembly with Cast Head Complete with 1/2″ NPT SS Mounting Adapter PVC Coated Flex Armor Provides Moisture Resistance Design Fits Most Thermowells

1118 Series Engine Thermocouple

1118 Series Engine Thermocouple

High Temperature Glass Braid Insulation Braided Stainless Steel Overwrap 3/8 in. O.D. 310 Stainless Steel Protection Tube 1/2 in. O.D. Flexible 304 Stainless Steel Protection Conduit

780 Series Engine Thermocouple

780 Series Engine Thermocouple

3/8 in. O.D. 310 Stainless Steel Protection Tube Terminal Block is Easily Accessible for Extension Wire Connection

3660 Series Waterproof Engine Thermocouple

3660 Series Waterproof Engine Thermocouple

High Temperature Thermoplastic Rubber Extruded Cover Protects Sensor from Liquid Contamination Glass Braid Insulation with Stainless Steel Overwrap 3/8 in. O.D. 310 Stainless Steel Protection Tube Galvanized Steel Core Protection Conduit

1112 Series Heavy Duty Engine Thermocouple

1112 Series Heavy Duty Engine Thermocouple

1/4 in. O.D. 316 Stainless Steel Protection Tube High Temperature Glass Braid or Teflon Insulation. Braided Stainless Steel Overwrap Available with Different Size Compression Fittings Different (U) and (W) Dimensions Available Upon Request. Maximum (U) dimension = 8-1/4″

767 Series Heavy-Duty Engine Thermocouple

767 Series Heavy-Duty Engine Thermocouple

Ideal for Environments with Extreme Vibration and Corrosion 1/2 in. O.D. 316 Stainless Steel Protection Tube Terminal Block is Easily Accessible for Extension Wire Connection Ungrounded Element

1033 Series Heavy-Duty Engine Thermocouple

1033 Series Heavy-Duty Engine Thermocouple

For Installations where a Conduit Connection is Undesirable Compact Unit with Snap-on Terminal Head 1/4 in. or 3/8 O.D. 310 Stainless Steel protection tube Compression Fitting Available Upon Request

3810 Series Bearing Engine Thermocouple

3810 Series Bearing Engine Thermocouple

Ideal for Engine and Compressor Service Spring-loaded for Superior Bearing Contact Strain-Relieved Wire to Eliminate Thermocouple Breakage from Vibration High-Temperature Teflon with Braided Stainless Steel Overwrap 1/4 in. O.D. 304 Stainless Steel Protection Tube Identification: Model #, Sales Order #, […]

300HT Series Standard Thermocouple

300HT Series Standard Thermocouple

For High temperature (2100°F and Greater) Applications Industry Standard Color-Coded Quick Disconnect Very Popular and Versatile Design Argon Chamber Available Commonly Installed with Compression Fittings

800HT Series Thermocouple Element

800HT Series Thermocouple Element

For High Temperature (2100°F and Greater) Applications Bare Leads Provided for Terminations of Your Choice A Replacement Thermocouple Element

400HT Series Transition Joint Thermocouple

400HT Series Transition Joint Thermocouple

Ideal for Limited Space Applications For High temperature (2100°F and Greater) Applications Industry Standard Color-Coded Quick Disconnect or Bare WIres Has a Rugged, Sealed Transition Argon Chamber Available Commonly Installed with Compression Fittings (Adapter)

900HT Series Miniature Head Thermocouples

900HT Series Miniature Head Thermocouples

For High Temperature (2100°F and Greater) Applications Supplied with a Lightweight Miniature Screw-Cover Head Waterproof Cover Available Argon Chamber Available Commonly Installed with Compression Fittings

16100 LAG Thermowell Assembly

16100 LAG Thermowell Assembly

Complete Thermocouple/ Thermowell Assembly Supplied with a Threaded Thermowell (.260″ Bore) Explosion Proof Head is Standard Supplied with Standard Lag Length

16000 Standard Thermowell Assembly

16000 Standard Thermowell Assembly

Thermowell has Step-Down Design Complete Thermocouple/ Thermowell Assembly Supplied with a Threaded Thermowell (.260″ Bore) Explosion Proof Head is Standard

16200 Heavy Duty Thermowell Assembly

16200 Heavy Duty Thermowell Assembly

Tapered Design Provides Greater Rigidity than Straight Shank Design Explosion Proof Head is Standard Supplied with a Threaded Thermowell (.260″ Bore)

16250 Heavy Duty LAG Thermowell Assembly

16250 Heavy Duty LAG Thermowell Assembly

Supplied with a Threaded Thermowell (.260″ Bore) Explosion Proof Head is Standard Supplied with Standard Lag Length

16300 Heavy Duty Thermowell Assembly

16300 Heavy Duty Thermowell Assembly

Tapered Design Provides Greater Rigidity than Straight Shank Design Explosion Proof Head is Standard Threaded Tapered Thermowell with .385″ Bore

16350 Heavy Duty LAG Thermowell Assembly

16350 Heavy Duty LAG Thermowell Assembly

Threaded Tapered Thermowell with .385″ Bore Explosion Proof Head is Standard Supplied with Standard Lag Length

16700 Flanged Thermowell Assembly

16700 Flanged Thermowell Assembly

Complete Flanged Thermowell Assembly with .260″ Bore Explosion Proof Head is Standard Flange is Fully Welded to Thermowell

16800 Van Stone Thermowell Assembly

16800 Van Stone Thermowell Assembly

Complete Van Stone thermowell assembly with .260 bore Explosion Proof Head is Standard Can be supplied with LAP Joint Flange

17010 Metal Protection Tube Assembly

17010 Metal Protection Tube Assembly

Plain Protection tube Assembly Ideal for Application Where Flow and Pressure Are Not a Major Concern Explosion Proof Head is Standard Cost is Generally Lower than Barstock Thermowells

17020 Metal Protection Tube Assembly

17020 Metal Protection Tube Assembly

Adjustable Flange Mounting Assembly Ideal for Application Where Flow and Pressure Are Not a Major Concern Explosion Proof Head is Standard Cost is Generally Lower than Barstock Thermowells

17040 Metal Protection Tube Assembly

17040 Metal Protection Tube Assembly

Fixed Flange Protection Tube Assembly Ideal for Application Where Flow and Pressure Are Not a Major Concern Explosion Proof Head is Standard Cost is Generally Lower than Barstock Thermowells

17030 Metal Protection Tube Assembly

17030 Metal Protection Tube Assembly

Fixed Bushing Protection Tube Assembly Ideal for Application Where Flow and Pressure Are Not a Major Concern Explosion Proof Head is Standard Cost is Generally Lower than Barstock Thermowells

17100 Ceramic Protection Tube Assembly

17100 Ceramic Protection Tube Assembly

Provides Better Protection in Hostile Environments than Metal Tubes Ceramic (2400°F) or Alumina (3000°F) Tubes are Offered For Use in Reducing and Oxidizing Atmospheres

17125 Ceramic Protection Tube Assembly

17125 Ceramic Protection Tube Assembly

This Series Offers Two Protection Tubes (One Inside the Other) Provides Better Protection in Hostile Environments than Metal Tubes Ceramic (2400°F) or Alumina (3000°F) Tubes are Offered For Use in Reducing and Oxidizing Atmospheres

1900 Uniwell

1900 Uniwell

Low Cost Alternative to Thermowell Assemblies Conductors Protected from Environment by Dense – Pack MgO and 446 SS Heavy Wall Sheath Simplicity of Installation Lower Conduction Losses Long-Life, 14 Gauge Nominal Size Conductors Elimination of Spring-Loading

1910 Uniwell

1910 Uniwell

Compression Fitting is Provided on this Series Conductors Protected from Environment by Dense – Pack MgO and 446 SS Heavy Wall Sheath Simplicity of Installation Lower Conduction Losses Long-Life, 14 Gauge Nominal Size Conductors Elimination of Spring-Loading Low Cost Alternative […]

1930 Uniwell

1930 Uniwell

Welded Flange Provided Conductors Protected from Environment by Dense – Pack MgO and 446 SS Heavy Wall Sheath Simplicity of Installation Lower Conduction Losses Long-Life, 14 Gauge Nominal Size Conductors Elimination of Spring-Loading Low Cost Alternative to Thermowell Assemblies

1920 Uniwell

1920 Uniwell

Fixed Fitting is Provided on this Series Conductors Protected from Environment by Dense – Pack MgO and 446 SS Heavy Wall Sheath Simplicity of Installation Lower Conduction Losses Long-Life, 14 Gauge Nominal Size Conductors Elimination of Spring-Loading Low Cost Alternative […]

6000 Series Standard Thermowell

6000 Series Standard Thermowell

Standard Bore Size: .260″ Reduced Tip for Faster Heat Response Brass Plug and Chain Optional

6200 Series Standard Thermowell

6200 Series Standard Thermowell

Standard Bore Size: .260″ Tapered Design to Provide Greater Rigidity Brass Plug and Chain Optional

6100 Series Standard Lag Thermowell

6100 Series Standard Lag Thermowell

Standard Bore Size: .260″ Reduced Tip for Faster Heat Response Brass Plug and Chain Optional

6250 Series Heavy Duty Thermowell

6250 Series Heavy Duty Thermowell

Standard Bore Size: .260″ Tapered Design to Provide Greater Rigidity Brass Plug and Chain Optional

6300 Series Heavy Duty Thermowell

6300 Series Heavy Duty Thermowell

Standard Bore Size: .385″ Tapered Design to Provide Greater Rigidity Brass Plug and Chain Optional

6350 Series Heavy Duty Thermowell

6350 Series Heavy Duty Thermowell

Standard Bore Size: .385″ Supplied with a Standard Lag Length Brass Plug and Chain Optional

6400 Series Test Thermowell

6400 Series Test Thermowell

Standard Bore Size: .385″ Brass Plug and Chain Standard

6500 Series Limited Space Thermowell

6500 Series Limited Space Thermowell

Standard Bore Size: .385″ Brass Plug and Chain Standard

6600 Series Socket–Weld Thermowell

6600 Series Socket–Weld Thermowell

Standard Bore Size: .260″ or .385″ Used in Seal Welded Applications for Maximum Vessel Integrity Brass Plug and Chain Optional

6700 Series Flange Thermowell

6700 Series Flange Thermowell

Standard Bore Size: .260″ or .385″ Flange is Fully Welded to Thermowell Brass Plug and Chain Optional

6800 Series Van Stone Thermowell

6800 Series Van Stone Thermowell

Standard Bore Size: .260″ or .385″ Can be Supplied with a Lap Joint Flange Brass Plug and Chain Optional

404 Series Resistance Temperature Detectors

404 Series Resistance Temperature Detectors

Superior Stability, Repeatability and Accuracy Vibration and Shock Resistant Industry Standard 3-Pin Quick Disconnect with Teflon flexible Lead Wire Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω/°C […]

7000 Series Metal Protection Tubes

7000 Series Metal Protection Tubes

Protection Tubes Help Insure Longer Life and Continued Accuracy Protects Against Physical Damage, Corrosion, and Contamination Generally Less Expensive than Thermowells

7100 Series Ceramic Protection Tubes

7100 Series Ceramic Protection Tubes

Manufactured Under Rigid Controls to Maintain High Quality Provides Protection at High Temperatures – Alumina 3450°F – Ceramic 3100°K – Silicon Carbide 3000°F

7120 Series Metal-Ceramic Protection Tubes

7120 Series Metal-Ceramic Protection Tubes

Material is LT-1 (77% Chromium, 23% Aluminum Oxide) Good Thermal and Mechanical Shock Resistance (Superior to Ceramic Tubes) High Temperature Applications Up to 2500°F Excellent Oxidation Resistance for Temperatures Over 2200°F

303 Series Resistance Temperature Detectors

303 Series Resistance Temperature Detectors

Superior Stability, Repeatability and Accuracy Vibration and Shock Resistant Industry Standard 3-Pin Quick Disconnect Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω/°C Commonly Installed with Compression Fittings […]

808 Series Resistance Temperature Detectors

808 Series Resistance Temperature Detectors

Bare Leads Provided for Termination of Your Choice Replacement RTD Element Close Interchangeability Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ± 0.1% at 0°C is Standard Standard Temperature Coefficient .00385 Ω/Ω/°C

707 Series Resistance Temperature Detectors

707 Series Resistance Temperature Detectors

Industrial Design with Cast Screw Cover Heads “Factory Mutual” Approved Heads in Cast Iron and Aluminum Various Male NPT Mounting Fittings are Available Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C Standard […]

909 Series Resistance Temperature Detectors

909 Series Resistance Temperature Detectors

Superior Stability, Repeatability and Accuracy Vibration and Shock Resistant Supplied with a Lightweight Miniature Screw Coverhead Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ± 0.1% at 0°C is Standard Standard Temperature Coefficient .00385 Ω/Ω/°C

2101 Series Refinery Resistance Temperature Detectors Assembly

2101 Series Refinery Resistance Temperature Detectors Assembly

Complete RTD Assembly with Cast Head PVC Coated Flex Armor Provides Moisture Resistance Complete with 1/2″ NPT Mounting Adapter Design Fits Most Thermowells Standard Resistance Value 100 Ohms at 0°C, Others Available

5627 Series Magne–RTD

5627 Series Magne–RTD

Magnet Holding Force is 16 lbs. Rugged Assembly for Most Applications Measures Temperature from Any Ferrous Surface Capable of Use to 1000°F (535°C) Without Degradation The Powerful Alnico Magnet Forces the Springloaded Sensing Tip Into Contact with the Sensor Surface […]

26000 Standard RTD Thermowell Assembly

26000 Standard RTD Thermowell Assembly

Complete RTD/Thermowell Assembly Supplied with an Explosion Proof Cast Head Resistance Value 100 Ohms at 0°C Standard, Others Available Resistance Tolerance of ±0.1% at 0°C is Standard Temperature Coefficient .00385 Ω/Ω/°C Standard

26100 Series Lagged RTD Thermowell Assembly

26100 Series Lagged RTD Thermowell Assembly

Complete RTD/Lagged Thermowell Assembly Supplied with Threaded .260″ Bore Thermowell and Explosion Proof Head Resistance Value 100 Ohms at 0°C Standard, Others Available Resistance Tolerance of ±0.1% at 0°C is Standard Temperature Coefficient .00385 Ω/Ω/°C Standard

26200 Series Heavy Duty RTD Thermowell Assembly

26200 Series Heavy Duty RTD Thermowell Assembly

Complete RTD/Tappered Thermowell Assembly Supplied with Threaded .260″ Bore Thermowell Explosion Proof-Head Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C is Standard Standard Temperature Coefficient .00385 Ω/Ω/°C Standard

26250 Series Heavy Duty RTD Lagged Thermowell Assembly

26250 Series Heavy Duty RTD Lagged Thermowell Assembly

Complete RTD/Lagged Thermowell Assembly Supplied with Threaded .260″ Bore Thermowell and Explosion Proof Head Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω/°C

26300 Series Heavy Duty Thermowell Assembly

26300 Series Heavy Duty Thermowell Assembly

Complete RTD/Heavy Duty Thermowell Assembly Supplied with a .385″ Bore Tapered Thermowell and Explosion Proof Head Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω/°C

26350 Series Heavy Duty RTD Lagged Thermowell Assembly

26350 Series Heavy Duty RTD Lagged Thermowell Assembly

Complete RTD/Lagged Thermowell Assembly Supplied with a .385″ Bore Tapered Thermowell and Explosion Proof Head Standard Resistance Value 100 Ohms at 0°C, Others Available Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω/°C

26700 Series Flanged RTD Thermowell Assembly

26700 Series Flanged RTD Thermowell Assembly

Flange Fully Welded to Thermowell .260″ Bore Flanged Thermowell Assembly and Explosion Proof Head Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω°C

26800 Series Van Stone RTD Thermowell Assembly

26800 Series Van Stone RTD Thermowell Assembly

.260″ Bore Van Stone Thermowell Assembly and Explosion Proof Head Standard Resistance Tolerance of ±0.1% at 0°C Standard Temperature Coefficient .00385 Ω/Ω/°C

Bearing Turbine RTD

Bearing Turbine RTD

Ideal for engine and compressor service Spring-loaded for superior bearing contact High-temperature Teflon® insulation with braided stainless steel overwrap PT100 DIN 43760-1980 @ 0.003850

Waterproof Turbine RTD

Waterproof Turbine RTD

High temperature thermoplastic rubber extruded cover protects sensor from liquid contamination. Glass braid insulation with stainless steel overwrap. 3/8 in. 304 stainless steel overwrap Galvanized steel core protection conduit Compression fitting available for adjustable insertion depths PT100 DIN 43760-1980 @ […]

Heavy-Duty Turbine RTD 820

Heavy-Duty Turbine RTD 820

For installations where a flexible conduit connection is undesirable 3/8 in. O.D. 304 stainless steel protection tube Terminal block is easily accessible for extension wire connection Reducers available PT100 DIN 43760-1980 @ 0.003850

Heavy-Duty Turbine RTD 830

Heavy-Duty Turbine RTD 830

For installations where a flexible conduit connection is undesirable Compact unit with snap-on locking terminal head 1/4 in. or 3/8 in. O.D. 304 stainless steel protection tube Terminal block is easily accessible for extension wire connection PT100 DIN 43760-1980 @ […]

1500 Series High Pressure Thermocouple

1500 Series High Pressure Thermocouple

Temperature Sensing at Pressures Up to 60,000 PSI (PSI Rating Limited Only By High Pressure Fitting) 316 Stainless Steel Sheath Material and Support Tube Standard Compacted MgO Insulation Grounded Junction (W2) Standard Industry Standard Color Coded Disconnect

Heavy-Duty Turbine RTD 840

Heavy-Duty Turbine RTD 840

3/8 in. O.D. 304 stainless steel protection tube. High temperature glass braid insulation Braided stainless steel overwrap 1/2 in. O.D. flexible 304 stainless steel protective conduit PT100 DIN 43760-1980 @ 0.003850

Light-Duty Turbine RTD

Light-Duty Turbine RTD

1/2″-14 NPT compression fitting. 1/2 in. box connector PT100 DIN 43760-1980 @ 0.003850

Spring-Loaded Turbine RTD

Spring-Loaded Turbine RTD

Aluminum screw-top head permits transmitter installation 1/4 in. O.D. 304 stainless steel protection tube PT100 DIN 43760-1980 @ 0.003850 Spring loaded for use with thermowell or fixed for direct immersion

108/109 Series High Temperature Connector

108/109 Series High Temperature Connector

A specialized thermocouple connector for high temperature applications up to 1000°F (538°C) All fastenings are stainless steel and are non-magnetic and non-rusting A specialized thermocouple connector for high temperature applications up to 1000°F (538°C). This positive contact polarized connector is […]

Adjustable Immersion Turbine RTD

Adjustable Immersion Turbine RTD

Teflon-coated with stainless steel overbraid 1/4 in. O.D. 304 stainless steel protection tube PT100 DIN 43760-1980 @ 0.003850

Water Proof Connector

Water Proof Connector

Accommodates Thermocouple Sheath Diameters from .062″ to .250″ Connector Bodies are Type 303/304 Stainless Steel Polarized Connector Contains Matched Thermocouple Alloy Contacts to Insure Accuracy Assembly is Rated 225°F (107°C) Service Unit is Pre-Wired at Factory with Extension Grade PVC […]

Waterproof Quick Disconnect Connector

Waterproof Quick Disconnect Connector

Accommodates any Two Combination of Sheath Diameter from .062″ to .250″ Connector Bodies are Type 303/304 Stainless Steel Polarized Connector Contains Matched Thermocouple Alloy Contacts to Insure Accuracy Assembly is Rated 225°F (107°C) Service A waterproof quick-disconnect connector, designed for […]

110/111 Series High-temperature Connector to +350°F (+177°C)

110/111 Series High-temperature Connector to +350°F (+177°C)

A standard industrial ANSI color coded thermocouple connector for use up to +350°F (+177°C) The housing is made of glass filled nylon instead of ceramic and has much improved impact resistance A standard industrial ANSI color coded thermocouple connector for […]

130/131 Series Miniature Connector

130/131 Series Miniature Connector

This miniature connector is ideal for use where space is at a premium The body is glass filled nylon with an overall temperature rating of 350°F (177°C) continuous A miniature connector is ideal for use where space is a premium. […]

150/151 Series 3-Pin Connector

150/151 Series 3-Pin Connector

A three pin version of the 110 and 111 series connector for use on thermocouple or RTD assemblies This connector has 3 rolled copper pins with polarity markings, a glass filled nylon shell rated to 350°F (177°C) continuous 3-Pin version […]

1013 Series Jack Panel

1013 Series Jack Panel

A five point jack that can be readily installed into a standard FS or FD conduit box Contact materials are thermocouple alloys embedded in molded phenolic Each circuit is identified by numbers 1-5. Jack panel accepts series 109 and 111 […]

1014 Series Multi-Strip Panel

1014 Series Multi-Strip Panel

Panels available in 2, 4, 6, 8, 10, and 12 circuits, also in combinations of thermocouple alloys in one strip Combinations must be multiples of two and must total the number of circuits in each strip. The overall temperature rating […]

Cable Clamps 1209 Series

Cable Clamps 1209 Series

Recommended for use with series 108, 109, 110, 111, 150 and 151 connectors. This clamp will accommodate extension leads up to 3/8″ diameter

Cable Clamps 1239 Series

Cable Clamps 1239 Series

Recommended for use with series 130 and 131 connectors. This clamp will accommodate extension leads up to 3/8″ diameter

Tube Adapters 1210 Series

Tube Adapters 1210 Series

For use with 108, 109, 110, 111, 150 and 151 connectors to rigidly mount a quick disconnect to your sheathed thermocouple.

Tube Adapters 1240 Series

Tube Adapters 1240 Series

For use with 130 and 131 connectors to rigidly mount a quick disconnect to your sheathed thermocouple.

Weatherproof Boot  1471 Series

Weatherproof Boot 1471 Series

A flexible neoprene rubber boot especially designed for moisture proofing wire connections on the 1015 or the 1016 series head. The boot fits tightly around the base of the head, and 1/8″ to 3/16″ tapered hole seals a variety of […]

Thermoseal

Thermoseal

Polymerized Low-Viscosity Silicone Prevents Moisture penetration up to 1000°F (538°C) 2 oz. bottles standard, 8 oz. available. ”Thermoseal” is a polymerized low-viscosity silicone fluid with proven ability to form a positive moisture barrier for mineral insulated thermo-couple and heater elements. […]

Leadwire Adapter

Leadwire Adapter

Open end thermocouples should be sealed with a moisture sealant such as “Thermoseal” after conductors have been exposed prior to attaching leadwire. A small, easily assembled transition fitting for adapting sheathed, mineral oxide insulated thermocouples to leadwires. the leadwire adapter […]

BF Series Brass Mounting Adapter

BF Series Brass Mounting Adapter

A brass compression type fitting containing a ferrule to accommodate your desired probe diameter. An economical and practical fitting used in areas where pressure and temperature are relatively low. Other tube and thread combinations available. Consult factory.

SF316 Series Stainless Steel Mounting Adapter

SF316 Series Stainless Steel Mounting Adapter

A leakproof double ferrule type compression fitting machined from 316 stainless steel. The ferrules are deformed during assembly and cannot be relocated on the thermocouple assembly. It is ideal where the probe must be removed and replaced at the same […]

ST304 Series Stainless Steel Mounting Adapter with Sealant

ST304 Series Stainless Steel Mounting Adapter with Sealant

Soft sealant-type machined from stainless steel Sealants are available in lava, neoprene and teflon Replacement sealants are also available A soft sealant-type fitting machined from stainless steel. Thermocouple may be relocated to various immersion depths by loosening threaded cap and […]

SF304 Series Stainless Steel Mounting Adapter

SF304 Series Stainless Steel Mounting Adapter

Metal ferrule-type machined from stainless steel Ferrule and thermocouple sheath are deformed during installation A metal ferrule-type fitting machined from stainless steel. Ferrule and thermocouple sheath are deformed during installation; therefore thermocouple cannot be repositioned after metal deformation. Mounting adapter […]

1417 Series Replacement Sealants

1417 Series Replacement Sealants

Listed are replacement sealants for our ST304 Series Mounting Adapters. When ordering, specify part number for the sealant required and add sealant material suffix letter to the end of the part number.

1020 Series Miniature Screw Cover Head

1020 Series Miniature Screw Cover Head

A light weight (only 3 oz.), all-aluminum head for single or duplex thermocouple elements. Readily adapted to small diameter protection wells or mineral oxide insulated sheathed thermocouples up to .250 diameter by use of a 1/8″ NPT compression fitting. Also […]

Cap–1053

Cap–1053

Mates with the 1513 adapter with simple push and twist-action, retained by spring tension.

Retaining Ring–M-1379-3

Retaining Ring–M-1379-3

Shoulder designed to transmit spring pressure to the thermocouples. Must be silver soldered to sheath.

Spring–1082

Spring–1082

Spring will always compress to approximately one half its relaxed length, hence it may be cut to desired size.

Adapter–1513

Adapter–1513

Slotted design allows fast screwdriver installation in 1/8″ NPT tapped hole.

Ceramic Terminal Head

Ceramic Terminal Head

1015 Series For Single or Duplex Thermocouple Applications A high-temperature binding screw type terminal similar to the 1016 Series, but capable of withstanding temperatures up to 1000°F. The four separate binding screws permit usage in duplex applications. Single thermocouples may […]

Fiberglass Terminal Head

Fiberglass Terminal Head

1016 Series For Single Thermocouple Applications This economical binding screw-type terminal is readily installed on Thermo-pak materials with standard silver solder. Four binding screws are provided, two for connection of thermocouple conductors and two for lead connections. This terminal has […]

Replacement Block 1018A

Replacement Block 1018A

1018A Single Terminal Block (2 Terminals)

MINIPAQ-HLP Programmable Temperature Transmitters

MINIPAQ-HLP Programmable Temperature Transmitters

MINIPAQ-HLP is a basic, programmable non-isolated, easy-to-use 2-wire transmitter. The Low Profile housing has a height of only 18.5 mm / 0.72 inch. Configuration is made in seconds with the user friendly Windows software, MINIPAQ Soft. No external power supply […]

Replacement Block 1018B

Replacement Block 1018B

1018B Duplex Terminal Block (4 Terminals)

Replacement Block 1018C

Replacement Block 1018C

1018C Triplex Terminal Block (6 Terminals)

MESO-H & MESO-HX Programmable Temperature Transmitters

MESO-H & MESO-HX Programmable Temperature Transmitters

MESO-H/-HX are smart and universal 2-wire in-head transmitters for temperature and other measurement applications. MESO-H/-HX are fully HART-compatible, with communication through the HART protocol. Features Utilizes HART Protocol for remote configuration and monitoring Communicates with HART Communicator or PC via […]

2018 Series Cast Explosion Proof Screw Head

2018 Series Cast Explosion Proof Screw Head

Available in cast iron and aluminum Cover contains internal threads and gasket to assure water-tight connection Ceramic terminal blocks for high temperature application Negative lead identification by color code is indicated inside cover A stainless steel chain is furnished with […]

1800 Series Tube Temp

1800 Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Best Value for Accuracy and Longevity Retaining Clip Furnished, Clip Material Matches Sheath Material

1028 Series Poly Head

1028 Series Poly Head

A polypropylene, gasket, screw cover head which is extremely resistant to most corrosive and capable of withstanding 220°F (105°C) continuous operations. This U-V stabilized plastic terminal head is both practical and economical. Available with either single or duplex terminal blocks […]

1800L Series Tube Temp

1800L Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Right Angle Bend which Turns Left for Ease of Installation Best Value for Accuracy and Longevity Retaining Clip Furnished, Clip Material Matches Sheath Material

1800R Series Tube Temp

1800R Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Right Angle Bend which Turns Right for Ease of Installation Best Value for Accuracy and Longevity Retaining Clip Furnished, Clip Material Matches Sheath Material

1800V Series Tube Temp

1800V Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Different Plane of Mounting between Inlet and Heater Tube Best Value for Accuracy and Longevity Retaining Clip Furnished, Clip Material Matches Sheath Material

1810 Series Tube Temp

1810 Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple For Transverse Tangent Mounting Where Tube Movements are Minimal Best Value for Accuracy and Longevity Retaining Clip Furnished, Clip Material Matches Sheath Material

1820 Series Tube Temp

1820 Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Most Commonly Used Design without Expansion Loop Best Value for Accuracy and Longevity Wrap Around Angle 90° “W” Retaining Clip Furnished, Clip Material Matches Sheath Material

1820R Series Tube Temp

1820R Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Best Value for Accuracy and Longevity Wrap Around Angle 90° “W” Retaining Clip Furnished, Clip Material Matches Sheath Material For Thru-Floor or Roof Penetration where Thermocouple Can Move with Tube

1820L Series Tube Temp

1820L Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Best Value for Accuracy and Longevity Wrap Around Angle 90°“W” Retaining Clip Furnished, Clip Material Matches Sheath Material For Thru-Floor or Roof Penetration where Thermocouple Can Move with Tube

1830L Series Tube Temp

1830L Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Most Commonly Used Design with Expansion Loop Ideal for Applications where Tube Movement is Greater than 3″ Best Value for Accuracy and Longevity Wrap Around Angle 90° “W” Retaining Clip Furnished, […]

1820C Series Tube Temp

1820C Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Best Value for Accuracy and Longevity Wrap Around Angle 90° “W” Retaining Clip Furnished, Clip Material Matches Sheath Material

1830R Series Tube Temp

1830R Series Tube Temp

Patented “Knife-Edge” Thermojunction More Accurate than Pad Type Thermocouple Most Commonly Used Design with Expansion Loop Ideal for Applications where Tube Movement is Greater than 3″ Best Value for Accuracy and Longevity Wrap Around Angle 90°“W” Retaining Clip Furnished, Clip […]

1700 Series Pad Type

1700 Series Pad Type

Pad Type 1700 is a Low Cost Alternative to “Tube Temp” Thermocouple Pad is Slotted for Higher Accuracy Used Where Severe Service Atmospheric Conditions are Not a Major Concern Suitable for Tight Space Limitations Can be Field Formed

1720 Series Pad Type

1720 Series Pad Type

Pad Type 1720 is the Lowest Cost Alternative to “Tube Temp” Thermocouple Commonly Referred to as “Tube Metal or Tube Skin Temperature Thermocouples” Used Where Maximum Service Temperature is 800°F 304SS Pad and Tube with 20 AWG Fiberglass Insulated Leadwire […]

1710 Series Pad Type

1710 Series Pad Type

Pad Type 1710 is a Lower Cost Alternative to “Tube Temp” Thermocouple Thermocouple is Welded on Top of Pad Used Where Severe Service Atmospheric Conditions are Not a Major Concern Suitable for Tight Space Limitations Can be Field Formed

Special Applications – Multi-Point Thermocouples

Special Applications – Multi-Point Thermocouples

TCP has worked closely with major petrochemical and refinery design companies in the development of multi-point thermocouple assemblies for specialized applications. These designs are currently in service world-wide throughout the petrochemical and refinery industry.

1600 Series High-pressure Thermocouple

1600 Series High-pressure Thermocouple

Temperature Sensing at Pressures Up to 60,000 PSI (PSI Rating Limited Only By High Pressure Fitting) 316 Stainless Steel Sheath Material and Support Tube Standard Compacted MgO Insulation Grounded Junction (W2) Standard Supplied with a Light Weight Screw-Cover Head

Spring Loaded Multi-Point Thermocouples

Spring Loaded Multi-Point Thermocouples

A leaf spring holds the junction to the inner wall of the thermowell. Spring loaded multi-points respond quickly to temperature changes. Thermocouple replacement requires entire element assembly to be returned to the factory for servicing or replacing the entire element.

Free Hanging Multi-Point Thermocouples

Free Hanging Multi-Point Thermocouples

Thermocouple elements are mounted to the desired length then bundled together. This type of assembly is often small in diameter allowing the thermocouples to fill up the inner area of the thermowell which reduces thermal lag. Thermocouple sensors can be […]

Multi-Guide Tube

Multi-Guide Tube

This is the most common and reliable multi-point design. It offers long life with little maintenance. Each guide tube is welded to a plug which is then welded into and becomes an integral part of the wall of the thermowell. […]

Engine Exhaust Thermocouple

Engine Exhaust Thermocouple

Available in various configurations for monitoring engine exhaust temperatures in gasoline or diesel engines.

Turbine Rake

Turbine Rake

Measure temperature and/or air pressure in aircraft turbine engines.

Dual Thermocouple Cone Ring

Dual Thermocouple Cone Ring

Used extensively in plastic extruder.

D3100 Series Process Indicator with Outputs

D3100 Series Process Indicator with Outputs

Bright, long lasting LED display, 0.56″ LED 2 Relay Outputs 4-20mA or 0-10V analog output (user selection) Drip-proof and dust tight Front Cover NEMA 12 Compact 1/8 DIN case Plug in screw terminal connectors Wide range of engineering units Slot […]

Seal Ring Thermocouple

Seal Ring Thermocouple

Proprietary designs of ring thermocouples.

FDX Series Multi-Point Temperature Indicator

FDX Series Multi-Point Temperature Indicator

FDX-II User-selectable global or individual alloy type Temperature scale Adjustable on-time Multi-point, multi-alloy thermocouple capability UL listed as intrinsically safe for use in Class 1, Groups C and D, Division 1 environments Automatic shut-off for battery conservation Panel template included […]