
355C Series Shawnee II Digital Reset Timer
About the 355C Series Shawnee II Digital Reset Timer from the Automatic Timing and Controls Division of Marsh Bellofram Corporation: A compact version of the 335 Timer, the ATC 355C is its exact functional duplicate, packaged in a 72 mm2 […]


353C Series Shawnee II Digital Programmable Timer
Control Versatility Computer Tested Reliability Save 40% in Panel Space and Cost Wide Range Noise Immunity Cycle Progress Indication Outstanding Repeat Accuracy Cycle Progress Indication Plug-In and Dust Tight The 353B Directly Replaces 353A


365C Long-Ranger Computing Timer
365C long-ranger computing timer: The 365C long-ranger computing timer from Automatic Timing and Controls is microprocessor-based digital timer with three rotary knobs for setting and adjustment of the Preset. The Preset can be any three-digit value from .01 Sec to […]


365M Long-Ranger Computing Timer with Memory
EEPROM Memory Magnetic Latching Relay Delayed & Instantaneous DPDT Contacts Switch Selectable Sec., Min. or Hrs. Ranges Nine Ranges 0 to 9.99, 99.9 or 999 High Accuracy & Noise Immunity Easy Plug-In Housing High Intensity Blue Fluorescent Display Fully Gasketed […]


651 Series Panel Mounted Digital Timer
Direct Replacement For Electromechanical Timers Four Timing Modes Data Retention with EEPROM Memory or Battery Five Time Ranges Simple Keypad Time Setting Sealed Faceplate Keypad Lockout of Time Setting Easy Programming Instantaneous Contacts Directly Track the Control Input


655 Series Panel Mounted Digital Timer
The 655 Series timer from Automatic Timing and Controls is an electronic control that will retrofit most round case electromechanical timers. the control performs the same timing modes (ON-Delay or Reverse Start Delay) as electromechanical units, and it is capable […]


653 Series Multi-Function Multi-Range Solid State Timer
About the 653 Series Multi-Function Multi-Range Solid State Timer: Functions As Timer or Counter Five Time Ranges Six Single-Cycle and Eight Repeat-Cycle Timing Modes Sealed Faceplate Cycle Counter Count Input Scaling Data Retention Memory with EEPROM Circuitry. (653-8-2000, 653-8-2001 Models) […]


400 Series Interval Timer OLD
The 400 Series Interval Timer from the Automatic Timing and Controls division of Marsh Bellofram is a timer with pointer that is manually set to the desired time. At the instant the knob is turned from zero, the switch MS […]


385A Series Timer Counter with Memory
About the 385A Series Timer Counter with Memory from the Automatic Timing and Controls division of Marsh Bellofram: In the timer mode, the 385A Series Timer Counter with Memory can be programmed to cover the overall span of 001 SEC […]


400 Series Interval Timer
The 400 Series Interval Timer from the Automatic Timing and Controls division of Marsh Bellofram is a timer with pointer that is manually set to the desired time. At the instant the knob is turned from zero, the switch MS […]


652 Series Multi-Function Multi-Range Timer
The 652 Series Multi-Function Multi-Range Timer is a micro-processor-based timer with a 4-1/2 digit LCD display that can provide an indication of either preset time remaining or elapsed. There are five timing ranges covering time values from one millisecond to […]
