VELOCITY AND POSITION SENSOR

Features:

Tachometer                                                                            

Output Voltage                      1 to 50 VDC/1000RPM (7 volts/1000 RPM Standard)

Shaft Diameter                      .120" .187" .250" (other diameters available)

Mounting                                Face(Round) - Square Flange- Round Flange(custom designs available)

Body Diameter                        1.134 inches

Please see other DC tachometer pages for more information A-Series  B-Series  D-Series  Low Ripple

Encoder

Resolution                           Up to 1024 lines per revolution

Channels                             Single or Dual

Voltage                               5 volts or 12 volts

Body Diameter                    2.00 inches

The PTS Series Tachometer/Encoder combination provides both velocity and position signals from one device. The DC Tachometer has the same high quality construction as all of Servo-Tek's Tachometers. The Encoder section uses high quality optical sensors and electronics to provide a square wave output. By having the Tachometer and Encoder on one common shaft, mounting and coupling requirements are reduced. The DC Tachometer Generator can provide an analog signal from 12,000 RPM down to Zero speed. Since the DC Tachometer Generator reverses polarity from CW to CCW rotation, direction can be sensed almost instantaneously. Position signals from the Encoder can be processed and used the same as any other Incremental Encoder. Please contact the factory for more details on this cost effective package.

SERVOTEK PRODUCTS COMPANY, INC.
8019 Ohio River Blvd.
Newell, WV 26050
(800) 727-5646
E-mail: sales@servotek.com