Timers

1/16 Din Timers

405AR Series

The 405AR has Interval Timing Modes, two modes of operation, On Delay or Interval timing modes. All 405 AR timers can be powered using 20 to 240V AC or 12 to 240V DC power, reducing inventory management of replacement units. The 48mm (1/16 DIN) housing is compact and rated for P40 on the face plate. The 405AR is mounted in a 8-pin round socket. The dial on the 405AR is extra large and easy to read.

407B Series

The 407B is available with selectable On-Delay, Off-Delay or Interval timing modes. These timing modes energize a set of DPDT output contacts. When in the On-Delay mode, the 407B begins timing when the timer is energized.

409A Series

The 409A has a Push Button built into its front dial. When pressed, the timer starts and provides an interval time delay. The 409A has a set of DPDT output contacts. When the Push Button is pressed with power applied, the contacts immediately transfer. After the timer has timed out, the contacts release.

417B Series

The 417B True Off-Delay Timer is designed for the most rugged industrial environments. It offers exceptional electrical noise immunity, with excellent setting and repeat accuracy. Each 417B can be powered from 24VAC to 240VAC and 24VDC, greatly simplifying ordering and inventory management

425A Series

The 425A is set digitally by rotating each setting knob until the desired Time Preset is displayed by the number wheels on the front of the timer. The digital setting allows exact, accurate and repeatable timing cycles.