Create Model Number >>>>> |
223 |
xx |
 xx |
xx |
xx |
Cutouts Hinged in Cover |
B |
1 |
X |
X |
|
Blank—No cutout in cover |
|||||
5 hole pattern |
T |
||||
353, 354, 355, 356, 365, 366, 376, 385 |
U |
||||
Conduit Holes |
|||||
None, customer to cut out holes as required |
|||||
1" conduit hole in top surface (hinges on top) |
2 |
||||
1" conduit hole in right side (hinges on top, looking at front) |
3 |
||||
1" conduit hole in left side (hinges on top, looking at front) |
4 |
||||
Special |
0 |
||||
Features |
|||||
Standard case, no base plate, no connectors |
|||||
With 5-1/2" square, base plate inside ready for mounting, the 322B or 324D (up to 3 cams only) |
B |
||||
With standard 5-1/4" square blank base plate |
C |
||||
Standard Unit |
|||||
Special Unit |
K |
||||
 |
 |
 |
 |
||
 |
 |
||||
< Marsh Bellofram Group of Companies < Automatic Timing & Controls < Accessories < NEMA 12 Molded Case
 |
 |
Downloadable Files: |
 Molded Case (108KB) |
Nema 12 Molded Case |
|
Product Detail: |
|
A NEMA 12 enclosure molded of 1/8 inch thick High Impact ABS, the series 223 cases provides an economical way to mount and protect a single timer or counter. It is fully gasketed, weather resistant and is designed for surface mounting. Options include factory cutouts for mounting a device through the cover, and plates for mounting it inside the case.
The NEMA 12 enclosure is available as an accessory part for use with the following ATC products: Series 304, 305, 309, 310, 322, 325, 326, 333, 334, 335, 336, 353, 354, 355, 356, 365, 366, 376, 378 and 385. |
Part Numbers: |
|
|
Options: |
|
Consult Factory.
|
| Cart: |
| . |
Product Contact: |
|
| Specifications: | |
